|
sta mislite o ovom detektoru???
dali se isplati izdvojiti 2 hiljade eura za ovaj detektor i dali je tacno da je efikasan do 4 metra dubine ili je to samo naduvano????
The ARGUS GD3003A is a metal-detector with the latest Dual-Processor technology.
One processor takes over the measurement processing whilst the second one controls
the completely newly-developed Pulse Isolation Unit (PIU). This enables measurement
amplification for the first time, so that Gold can also be searched for and differentiated at
larger depths. The GD3003A uses the latest 5th generation Pulse Induction System with
digital measurement processing, graphic monitor and, thanks to PIU technology, with the
most accurate Gold indication, based on complex software.
The detector has been developed up to the latest technological level and is based on the
digital Pulse Induction Detector GD2002P which has proven itself for years. It's a device
which was manufactured in great numbers and which has functioned to the complete
satisfaction of its owners. With the new PIU technology, the total digitalisation of the
measuring system has been pushed even further.
The signal processing and system control is carried out using the most modern Dual-
Processor technology for fast and reliable measurement. With the futuristic programming
and the additional programming port, the software can be adapted to cope with new
problems in the future. The software has been especially written for the requirements of
selective searching for gold.
A clear graphic display leads even the beginner, step-by-step, with optimal device
settings, to a successful search. A find is indicated both acoustically via loudspeaker or
headphones and shown in the graphic display. This enables conclusions to be drawn
immediately about the located metal. By switching to the time-line mode it is at last
possible to search larger areas quickly.
The GD3003A can be operated with various search-coils. They can be simply selected in
the appropriate menu. The maximum achievable penetration depth varies very much with
the type of coil used. (See Technical Details).
A high performance IGBT power amplifier ensures the optimal conformity of the coil with
the system. The devices amplifier has a power of 300 Watt. This means that even larger
coils (1 x 1 metre) can be used,
With the GD3003A, a pulse induction system having measurement amplification with
digital signal processing has finally been realized for the first time. This is the foundation
for the 5th generation pulse induction system.
Technical Details
System : Pulse Induction of 5th Generation with PIU-Technology
Impulse Power : 430 Watt (250 µs)
Power Amplifier : IGBT 1200 Volt / 25 Amp. / 300 W / Impulse 150 A
Frequency : 500 Hz / 650 Hz (8/10 MHz Quartz)
Pulse Isolation Unit (PIU) : C16-S1-D, Release 3.0.1
Operating Time : 4 - 6 hr. depending on impulse amplification
Operating Elements : ON/OFF Switch
: Keypad with 12 Keys
Connectors : Search-Coil
: Headphones
: Charger
: Data-Port
Display : Graphic-Display 128 x 64 Pixel
Processor : Dual-Processor-Technology
Speaker : 40 mm
Headphones : 2 x 32 Ohm, Volume adjustable
Telescopic Shaft : Fiber glass, 3-part175 cms long, extendible
Power Supply : Internal via NC Battery, 18 Volt / 2000 mA
Charger : Plug-in Charger
Charging Voltage : 24 Volt
Charging Current : 200 mA
Charging Time : 15 hrs.
Dimensions : 178 x 178 x 95 mm
Weight : 1800 gms
Theoretical Search-Depths : max. with Ų28 cms Search-Coil - 2,80 m
max. with 50x50 cms Search-Coil - 3,50 m
max. with 100x100 cms Search-Coil - 4,00 m
The penetration-depth depends on the diameter of the search-coil, the pulse
amplification, the soil characteristics, and the object size.
The working-depth of the discriminator depends on the relationship between ferrous and
nonferrous parts (soil). A special alloy algorithm provides the most accurate metal
discrimination.
|